Yuvaraj Kaniyar

Welcome to my portfolio.

I am Yuvaraj K, an engineering student at the University of Visvesvaraya College of Engineering (UVCE), Bengaluru, with a focus on embedded systems, intelligent hardware, and next-generation electronic design. My work emphasizes practical engineering solutions grounded in deep technical knowledge across circuit theory, digital systems, and system architecture.

About Me

Currently pursuing a Bachelor of Technology (B.Tech) degree in Electrical and Electronics Engineering (expected graduation: October 2026), I specialize in embedded hardware design and electronic system development. My experience includes STM32-based systems, FPGA prototyping, drone technologies, and IoT-based smart systems. I am committed to solving real-world problems through engineering innovation and research.

Highlighted Projects

Arecanut Harvesting Drone
- Developed an STM32-powered drone with a specialized mechanical harvesting mechanism.
- Conducted market validation through IndiaMart, generating over 200 qualified leads and securing prototype funding.
UWB-EMF-Based 3D Object Mapping
- Designed an AI-assisted drone system using UWB electromagnetic waves (500 KHz to 2 GHz) for through-wall imaging.
- Achieved centimeter-level precision by enhancing system bandwidth with STM32 and radar modules.
Omni-Directional Obstacle Avoidance Robot
- Designed and developed a fully functional Arduino-based omnidirectional robot with advanced motion control.
- Achieved 70% battery efficiency through system-level optimization.
Environmental IoT Systems
- Developed various IoT-based environmental monitoring solutions, including smart agriculture, air quality analysis, and gas leak detection systems using ESP32 and Firebase integration.
Low-Cost USB Oscilloscope
- Designed a compact, USB-powered oscilloscope interfaced with MATLAB for real-time signal visualization and processing.

Technical Skills

Languages: Verilog, C, C++, MATLAB
Platforms: STM32CubeIDE, Keil µVision, Arduino IDE, Raspberry Pi, Simulink
Tools: LTspice, NI Multisim, Firebase, Tinkercad, Fusion 360
Core Areas: Embedded Systems, Digital and Analog Circuit Design, ASIC and FPGA Design Flow, IoT Systems, Signal Processing

Certifications

Embedded Systems Bare-Metal Programming – Udemy
System Design through Verilog – NPTEL
MATLAB and Simulink On-Ramp – MathWorks
IoT Level 2 – Marvel UVCE
EV Level 2 – Marvel UVCE

Professional Links

LinkedIn: https://www.linkedin.com/in/yuvaraj-kaniyar
Instructables: https://www.instructables.com/member/yuvrajkaniyar
Email: yuvrajkaniyar@gmail.com